USB Color Display Tester can monitor Voltage, Current, Capacity, Electric Quantity, Power, Temperature, Load Impedance, D+/D- Voltage, Charging Time and other data of USB, and supports Qualcomm QC3.0 compatible QC2.0, BC1.2, iPhone 2.4A and other protocol quick charging voltage ranges, support OTG function. 8192 Pixel TFT Color Display, two in one measurement of USB and Type-C.
USB-C male head replacement cost of copper pin contact plug better, tighter current data more reliable.
The screen 180 degrees flip display settings function, to adapt to some chargers using inverted display as a positive display. The OTG protocol of Type-C can open the OTG digital function by inserting a random embedded Android switch head in the upper left corner of Android line.
The interface settings such as overvoltage, low voltage, overcurrent, backlight time, etc., and switch to the corresponding interface at the short button at the front desk, set up by adding double or three strokes.
The built-in PD protocol can open the Type-C interface with the PD protocol's intelligent charger unloaded power output display, so as to facilitate aging and testing.
The PD protocol quick charging mode measurement.
Features:
Become A Safety Guard of Your Devices
Detect Charging & Discharging Condition Of Your Devices
Multi-Interface USB-C Tester
More Display Modes
Crafted from high-grade LCD monitor, bright and clear enough to monitor the parameters on the screen monitor.
Wide Range of Application
This New Tester can be applied to test Type-C and Micro USB Devices.
Test Charging Speed & Quality of USB Cable
Under the circumstance of the constant power supply and sustained load, the larger voltage and the lower voltage drop of the USB cable detected by this USB Tester means that the better quality of the USB Cables will be.
Test Capacity and Electric Energy of Power Bank
Make sure the power bank to be tested is fully charged firstly, then plug this USB Tester into it and reset the capacity and electric energy by long pressing, and connect your phone or load or other discharging devices, making it charge for phone and or other discharging devices till power bank run out of its energy. Finally, the reading on this multimeter is real data of capacity of your power bank.
Test Charger
A Must Gadget for Testing or Repairing Your Phones & Chargers
Check the charging performance (charging speed and quality) of the output wall/car/solar panel chargers and USB charging cables, and test capacity and electric energy of power bank
It can be also used to find the highest current output of the Wireless Charger/ Wireless Charging Stand/Wireless Charging Pad.
Note: If the USB Tester doesn’t display any parameters, please insert the small adapter being sent with the package into the side hole on the USB Tester, to trigger the PD Charging Function.
Video Demo: https://www.youtube.com/watch?v=QMaHvU97XYQ
Specifications:
- Voltage measuring range: 3.30V~30.0V, resolution Precision: 0.01V
- Current measuring range: 0.00~5.10A, resolution Precision: 0.01A
- Capacity cumulative range:: 0~99999mAh, resolution Precision: 0.001Ah
- Power cumulative range: 0~999999mWh, resolution Precision: 0.001Wh
- Power metering range: 000.00~150.00W, resolution Precision: 0.01W
- Impedance Measuring range: 1~999.9ohm, resolution Precision: 0.1ohm
- Temperature Measuring Range: 0~80°C, resolution Precision: 1°C
- Maximum Timing: 999Hours 59Minutes 59 Seconds, resolution Precision: 1s
- Timer Charging Reminder: Countdown 24 hours, set value arbitrary
- USB D+ Voltage Range: 0V~2.999V, resolution Precision: 0.001V
- USB D- Voltage Range: 0V~2.999V, resolution Precision: 0.001V
- Full Charger Reminder Parameters of Mobile : <2W/0.5Hours
- Time to refresh: 500mS/ times
- Measurement rate: 0.5 times/s
- Alarm Mode: Siren Sound+ Display Hints
- Product size: 60mm x 60mm x 11mm
- Self-consumable flow: <0.02A
- Working temperature: -10~+60?
- Working humidity:: 10~80
